La Crosse Technology WS-7078TWC Manuale Utente

WS-7078UF Wireless 433 MHz Radio-controlled Weather Station Instruction Manual

10for the year. The day, date, and year will be automatically set once the WWVB signal is received. However, the day, date, and year can be manuall

11 G. Setting the LCD Contrast Note: There are 8 LCD contrast levels to choose from, “Lcd 0” is the lightest and “Lcd 7” is the darkest. 1. Pres

12 I. Weather Forecast The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon the change of

13 Sunny—indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds—indicates that the weather is expec

14The outdoor temperature and humidity is viewed in the OUTDOOR LCD. When there is more than one remote thermo/hygro sensor unit in operation a “box

15Note: Waiting 20 seconds during either the minimum or the maximum readings will automatically return the indoor weather station to the current tem

161. Press and hold the “AL1” button for 5 seconds or until the alarm-time display flashes in the DATE LCD. 2. Press and release the “IN” button to

17The WS-7078UF is able to receive signals from as many as 3 different remote thermo/hygro sensors. The remote sensor model(s) that you choose will

18by the “boxed” number), then press and release the “OUT” button. 3. Pressing and releasing the “OUT” button once will display the minimum temperat

193. Through the 2 screw holes of the bracket mark the mounting surface with a pencil. 4. Where marked, start the screw holes using the provided sc

2TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4 Quick Set-Up Guide 5 Detailed Set-Up Guide Battery Install

20 1. Using the Table Stand a. The indoor weather station comes with the table stand already mounted. If you wish to use the table-stand all that

21 2) Place remote thermo/hygro sensor closer to display. 3) Be sure all batteries are fresh. NOTE: For problems not solved, please contact La Cr

22Sensor): Outdoor Temperature and humidity reception (Indoor Weather Station): Every 3 minutes. Transmission Range: 80 feet (in open space). Power

23This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of co

3INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One TX4U remote thermo/hygro sensor with mounting bracket (Figure 2). 3. Th

4continually measuring every second, of every day, to an accuracy of ten billionths of a second per day. These physicists have created an internatio

5Note: The Thermo Hygro Transmitter transmits a signal every 3 minutes; after the batteries have been installed, the Weather Station will search for

6the time signal (reception is achieved easiest at night), it will display the correct time (factory setting is Eastern time zone). PROGRAM MODE Pro

72. Press and release the “CH” button to toggle between 12 and 24-hour time. 3. Press and release the “SET” button to confirm the 12/24-hour time s

85. Press and release the “SET” button to confirm your selection and advance to the Daylight Saving Time setting. C. Daylight Saving Time(DST) Set

9WWVB search every night between these hours and overrides any manually set time. The WWVB tower icon (appearing in the TIME LCD) will flash when a s